INVERTEC® V155-S STICK WELDER (SMAW)

INVERTEC® V155-S STICK WELDER

Top Features

• Two stick modes, SOFT and CRISP, provide the right arc characteristics for different types of electrodes.
• Fan-As-Needed™ (F.A.N.™) reduces noise and dust inside the machine.
• Auto-Adaptive Arc Force minimizes electrode sticking in the puddle without compromising arc stability or increased spatter.
• Automatic Hot Start boosts the current during starting to make striking an arc easier.
• Touch Start TIG® mode – it’s like getting a TIG welder for free!

Input Power

• 115/230/1/50/60

Processes

• Stick, DC TIG

Portable. Professional. Rugged. Affordable.


The Invertec® V155-S offers much more than you would expect from a welder this size. Weighing in at just under 15 lbs. (6.8 kg) the Invertec® V155-S is no lightweight contender. It packs the full punch of a heavyweight professional that you can take to the most demanding job sites. It features 120/230V auto reconnect operation and can operate from a portable generator. It can also plug into a 200 ft. (61 m) 230V extension cord so you can weld just about anywhere.

• Two stick modes, SOFT and CRISP, provide the right arc characteristics for different types of electrodes. 
• Fan-As-Needed™ (F.A.N.™) reduces noise and dust inside the machine. 
• Auto-Adaptive Arc Force minimizes electrode sticking in the puddle without compromising arc stability or increased spatter. 
• Automatic Hot Start boosts the current during starting to make striking an arc easier. 
• Touch Start TIG® mode – it’s like getting a TIG welder for free!

RANGER® 305 G EFI FALL CAMO CASE ENGINE DRIVEN WELDER (KOHLER®)

Top Features

• Kohler® Gasoline Engine - 25 HP EFI (Electronic Fuel Injection) for easier starts in cold weather and lower fuel use!
• Multi-Process Welding - Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and mixed gas) and arc gouging.
• Digital Weld Meters - makes it easy to precisely pre-set your procedures and monitor actual welding output.
• Superior Arc Performance - Lincoln Chopper Technology® provides easy starts, a smooth arc, low spatter and excellent bead appearance.
• Peak Single-Phase AC Generator Power for Motor Starting - 12,000 watts peak for motor starting

Processes

Stick, TIG, MIG, Flux-Cored

A WELDER FOR ALL SEASONS

Make the Ranger 305 G your portable welding station - general stick and downhill pipe, Touch Start™ TIG, MIG, and flux-cored wire capability. Choose the Ranger 305 G EFI (electronic fuel injection) for easier starts in cold weather and lower fuel consumption, with no choke starting required. The 9,500 watt continuous single-phase AC generator powers motors starting, tools and inverter welders for extended range and process capability.

Digital weld meters monitor actual welding output
12-gallon fuel capacity allows for extended operation
Electric fuel pump helps avoid vapor lock during high-altitude operation

Kohler® Gasoline Engine

• 23 HP carburetor. 
• 25 HP EFI (Electronic Fuel Injection) for easier starts in cold weather and lower fuel use! 
• Both engines have electric fuel pump to avoid vapor lock at high altitude operation. 

Multi-Process Welding 

• Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire and MIG (CO2 and mixed gas). 
• Only compact gasoline welder in North America rated at 29V for 300 amps of stick or CV welding. 
• CV wire welding with up to 5/64 in. (2.0 mm) diameter electrodes. 

Digital Weld Meters

• Digital weld meters for amps and volts makes it easy to precisely pre-set your procedures and monitor actual welding output. 

Superior Arc Performance

• Lincoln Electric Chopper Technology® – provides easy starts, a smooth arc, low spatter and optimal bead appearance. 

Peak Single-Phase AC Generator Power for Motor Starting

• 10,500 watts peak, 12,000 for EFI. 
• 9,500 watts continuous for high capacity needs such as a back-up generator, powering a Lincoln Electric Invertec® inverter welder. Also use for lights, a grinder or other power tools. 
• AC generator voltage is constant at 120V or 240V at any weld dial setting. 

Skewed Rotor Design

• Skewed rotor design provides AC power suitable for operating Lincoln Electric inverter power sources. Lincoln Electric was the first in the welding industry with this feature. 

Rugged Reliability

• Welding and AC Generator Outputs rated at 104°F (40°C).